SD card sleeve
Sunday, July 10th, 2011If you have an SD card without a case, you may find this handy.
A PDF file from which you can print out nine sleeves per US Letter sheet. Make sure you print at 100% scale.
Assembly instructions
- Cut out a sleeve along the thick lines.
- Place the card in the center of the sleeve so that it is outlined by the thin lines.
- Fold the bottom (rectangular flap) over first.
- Fold the side flaps over.
- Secure the bottom and side flaps with one square piece of three-quarter-inch Scotch tape.
- Fold the top flap over and inside.
- Flip the sleeve over and label it on the seamless side.